Learn how to use Aquana Mobile to power your smart valve down in order to conserve power.
Here are instructions for powering down your Smart Valve over bluetooth using Aquana Mobile:
- Login to Aquana Mobile
- Tap on your Organization Card to go to Valve Control, or tap the menu button and then tap Valve Control
- Make sure your Organization is selected.
- Select the Smart Valve you would like to update.
- Select your connection method, in this case tap Bluetooth, then tap Next.
- On the bottom of the screen you will see the status of the bluetooth connection. The app scan the area for the device, and then read the values from the device. Once the bottom button returns to display "Update Position", the device is ready to be controlled.
- Tap on the "Configure" tab at the top of the screen.
- Tap on the Gear icon next to the Smart Valve to "Configure your Valve".
- Tap on the Gear icon in the upper right corner of the screen to enter Advanced Settings.
- Tap on the button that says "System Off". This will power down your Smart Valve.
- To power it up again, apply a magnet to the short side of the housing opposite the cables for 3 seconds, and then swipe right.